Using and Mixing Ozone-Infused Glycerin

As ozone-infused glycerin becomes more and more popular, our goal at PurO3 is to provide valuable information that helps you properly use the product. Below, you'll find multiple ways to use ozone-infused glycerin along with mixing ratios and guidelines. Please remember these are recommendations and not to be used as medical advice.

 

We recommend using 10ml, 30ml and 60ml syringes for mixing.

 

Mixing Small Amounts
 
To mix, remove the plunger from a syringe and pour ozone-infused glycerin (OG) directly into the barrel of the syringe until it contains the right amount for your usage (details below). Next, add the water or saline required to complete the mixture. Insert the plunger into the syringe and leave an air gap between the mixture and the rubber stopper. Shake the syringe until the ozone-infused glycerin is dissolved. Push the excess air out of the syringe. You now have fully mixed OG.
 
Mixing Larger Amounts
 
Remove the plunger from your syringe and pour ozone-infused glycerin directly into the barrel of the syringe until it contains the right amount for your usage (details below). Insert the plunger back into the syringe and push the measured amount of OG into a container. Next, use a measuring device to add the proper amount of water needed for the mixture. Shake the container to mix. You now have fully mixed OG.
 
Mixing Recommendations
 
Create 20ml of mixed 5% OG
 
To create a 5% solution, use a 30ml syringe and add 1ml of OG and 19lm of water. Insert the plunger and leave an air gap between the mixture and the rubber stopper. Shake until dissolved.
 
Create 100ml of mixed 10% OG
 
To create a 10% solution, use a 30ml syringe and add 10cc of OG. Next, add the measured OG to a container and then add 90ml of water. Shake until dissolved.
 
Create 50ml of mixed 1% OG
 
Add 1ml of OG to a 10ml syringe. Next, fill a 60ml syringe with 50ml of water. Mate the 10ml syringe to the 60ml syringe with a female to female Luer connector. Push the 1ml of OG into the 60ml syringe. Shake until mixed. Next, dump out 25ml of liquid from the 60ml syringe and add back 25ml of OG-free water. Shake again.
 
Example Uses for Ozone-Infused Glycerin
 
Consume OG - 1 tsp per day (Tastes Great)  
Nebulize – 10% ozonated glycerin mixed with saline  
Nasal Spray – 5 to 10% ozonated glycerin mixed with saline  
Oral Mouth Wash – 10% ozonated glycerin mixed with water and essential oils like Peppermint
Eye Drops – 1% ozonated glycerin mixed with saline  
Skin Health – 10 to 20% ozonated glycerin mixed with water  
Age Spots – Dab straight ozonated glycerin on discolored spots  
Surface Disinfectant – 10% ozonated glycerin mixed with water  
Wound Healing – Apply straight ozonated glycerin to the wound
 
If you need syringes for mixing, you can find some at Promolife.